Adding a DVR/NVR
To monitor the real-time health status of a DVR/NVR, including its cameras and HDD, you must first add the device to the Agent application. Follow these steps to complete the setup:
-
Open the Agent application.
-
Navigate to Device Management.
-
Click Add More Devices.
-
In the Friendly Name field, enter a name for the DVR.
-
From the Select Device dropdown, choose the DVR’s brand/company.
-
(Optional) Enter the Router IP Address.
-
Enter the Device IP Address of the DVR.
-
Enter the Username and Password for the DVR.
-
Port Number and HTTP Port are set automatically, but you can adjust the Port Number if necessary.
-
Click Test and Add to complete the setup. Your DVR/NVR has been successfully added! You can now monitor its real-time health status, including camera feeds and HDD performance.
Adding a DVR/NVR via the Smart Surveillance Health Portal
-
Log in to the Smart Surveillance Health Portal and select your group.
-
Click on the Configurations tab on the left panel.
-
Select DVR/NVR to open the DVR Configuration page.
-
Click on the Add icon in the top right corner
-
Enter the following details:
-
Select Agent – Choose your assigned agent.
-
Device Name – Enter the DVR/NVR name.
-
Device Make – Specify the DVR/NVR brand.
-
IP Address – Enter the DVR/NVR’s IP address.
-
Username – Enter the DVR/NVR login username.
-
Password – Enter the DVR/NVR login password.
-
Port Number – Enter the DVR/NVR’s port number.
-
-
Click OFFLINE ADD to finalize the setup.
